Radial live toolhoder for facing mills Ø22 6000rmp

Radial live toolhoder for facing mills Ø22 with external coolant, 6000rmp max.

CodeTTL/10400/10

Valid for machines

Maximum speed 6.000 rpm.
External cooling (70 bar max.)
For the fastening of the collet, the purchase of the key CH41 (wreng size 41 mm) is recommended (part reference 330.12.00179).
Please remember that the fastening of the collet, while the toolholder is mounted on the turret, damages the guidance for the drive keys on the turret.
Interior perfectly sealed with PTFE rotating gaskets and a layer of ceramic on the axis in the contact areas. This is of vital importance and the ensurance of a much longer lifetime of the tool holder (it is widely known that the intrusion of coolant through the sealing is in general the principal reason for the deterioration of tool holders).
The rotating axis of the tool holder is tempered and rectified (NOT hard-turned as done by other manufacturers).
Maximum rigour and precision by double row roller bearings
Common axis of Ø22 for milling cutter with longitudinal and transverse grooves DIN 138